This is an introductory video about sharpening traditional woodturning tools using a slow speed grinder and the One Way Wolverine Sharpening System.
These two systems work well for repeating gouge set up for sharpening.
It is your choice on the one you want to use. I am posting PDFs of both the Raptor set up instructions and the Thompson set up instructions for the Verigrind 1 from OneWay. Print the set up pages of the Verigrind Jig at 100%. You can then place the Verigrind Jig on top of the print out and lock in your leg angle on the jig.