Time: 9:30 am until finish. This is a one day class
Location 12811 16th Ave N Plymouth Mn 55441
Google map Link: https://goo.gl/maps/9xYh6pkNTbB2
Registered for this class: R. Hicks, P. Zimmerman, D. Larson, JF Schultz, D Strock, P Kuhn, P Laes, S Mages
Mark is known as an expert in woodturning. He is a retired wood shop teacher and is known for his teaching skills. His demos include tool sharpening, thread chasing, sphere turning, box making, small vessels and making jigs for the lathe. Mark has demonstrated at most of the regional symposiums and at the national AAW symposiums.
Minnesota Woodturners Association
March 31 & April 2, 2017
With: Mark St.Leger
Friday & Sunday Class Title: Bias Box
(3” to 3 ½” “ dia. X 1 ½” tall)
We will break for lunch, there is a refrigerator on site you may bring a lunch, or go to one of the area restaurants.
Maximum of 10 Students Skill Level: Intermediate
(All stock will be supplied, precut Maple)
Class description: This 1-day class will incorporate safety, tool sharpening along with tooling techniques to create this very unique box. We will also be making jigs for the chuck to create the lid and eccentric finial.
Suggested tool list needed for each Participant: We will have some extra tools available,
½” Spindle Gouge (fingernail grind) ¼” round skew
Parting Tool Thin Kerf Parting Tool
½” or 5/8” Roughing Gouge Old table knife (stiff not thin/flexible)
Small Hollowing tools (5/8” opening) Safety Glasses
Vernier Calipers Tape Rule & Pencil
Sandpaper (120 thru 600 grit) 1-Golf Ball
Drill Chuck #2 Taper 1/8” & ½” drill bit, & 5/8” Fostner Bit
Sense of Humor
Straws (2) CA Glue/Accelerator
Diamond Hone or Slip stone
If you do not have some of these tools, we can share.